1, surface of cleaning material for bonding

2, bonding thickness R-673 is less than 2 mm

3, more than 30 minutes of pressing. R-673 is fully cured after 24 hours of exposure to air at room temperature.

Store in a cool, dry place.

Keep containers tightly closed to avoid contamination or contact with water or moisture.

Keep away from food and drink. Away from light and heat.

6 months

R-673 is easy to cure once it comes in contact with moisture, it should be stored in completely sealed packages away from sunlight and atmospheric moisture.

After completion of adhesive coating, unused adhesive should be immediately squeezed out to seal and preserve. When adhesive is used again, if there is some cured adhesive on the nozzle, the cured adhesive can be removed, it does not affect the normal use of the adhesive.

Ensure that the outlet pressure is constant to keep the parts together, as optimised bond strength is achieved after 24 hours and placed in a ventilated room.

When using R-673, R-673 adhesive coating must be fully exposed to air. The larger adhesive area to expose the air, the faster curing adhesive. Otherwise, the adhesive will cure more slowly or not cure at all.

The thicker the adhesive thickness of the R-673 coating, the longer the adhesive curing time, the higher the ambient temperature (not exceeding 60 °C), the higher the humidity, the faster the adhesive curing speed. Otherwise, the adhesive will cure more slowly.